C-Arm and Fluoroscopy Equipment Financing:
Mini, Mobile and Full-Size.

iLease Capital finances new, used and refurbished C-arms and fluoroscopy equipment, from mini extremity units for orthopedic and podiatry practices to mobile surgical C-arms and full-size vascular systems for surgery centers and hospitals. C-arms sit inside the wider imaging category but they have their own market, their own resale channel and their own set of value drivers, which is why they deserve a lender who reads the asset rather than treating every fluoroscopy unit the same. If you are pricing a C-arm, new or refurbished, you can talk it through with a specialist at (866) 545-3273. For the broader modality picture, see our medical imaging financing guide.

iLease Capital finances fluoroscopy for orthopedic and pain-management practices, surgery centers, urgent care, vascular and interventional groups and hospitals and financing may be available for transactions up to $5 million plus with no minimum floor. As a broker with more than 50 lender relationships rather than a single direct lender, iLease can match a specific C-arm to a funding partner that understands fluoroscopy collateral, which matters because a mini extremity unit and a full-size vascular flat panel system sit at opposite ends of the same category and should not be underwritten the same way. This guide breaks C-arms down by type, with current market price ranges, the brands and models you will encounter, the image intensifier versus flat panel decision and exactly what a lender looks at on a used system.

The Three Families of C-Arm

Fluoroscopy equipment falls into three broad families and the financing looks different for each. Mini C-arms are compact, low-power units built for extremity work in the hand, foot, wrist and ankle, and they are the most accessible tier to finance. Standard mobile C-arms are the full-size systems that roll into an operating room or a pain-management suite for general surgical, orthopedic and interventional fluoroscopy, and they cover a wide price band from modest refurbished units to premium flat panel platforms. Full-size vascular and hybrid systems, along with fixed radiographic-fluoroscopy rooms, sit at the high end where the detector, the field of view and the software carry real cost. Knowing which family you are buying is the first step, because it sets the price band, the documentation a lender will want and the way the deal is structured.

Mini C-Arms and Extremity Imaging

Mini C-arms are the entry point into fluoroscopy for orthopedic, podiatry, hand and sports-medicine practices, because they bring intraoperative imaging in-house without the size, power or shielding demands of a full-size system. New mini C-arms commonly run about $30,000 to $70,000, with advanced flat panel models climbing higher, and the refurbished market is active, with serviceable units available from the mid teens and fully refurbished systems ranging roughly $15,000 to $65,000 depending on the detector and warranty. Common platforms include the GE OEC MiniView and Elite MiniView, the Hologic Fluoroscan and the Orthoscan line. Because mini C-arms sit in an accessible price band and have a liquid resale market, they are frequently good candidates for application-only financing on qualifying transactions, where a short application stands in for full financial statements and an approval can come back quickly.

Standard Mobile C-Arms

Standard mobile C-arms are the workhorses of surgical and interventional fluoroscopy and they cover the widest price range in the category. New full-size mobile systems commonly run $80,000 to $350,000 or more depending on the detector, the field of view and the software, while the refurbished market brings the same platforms in at roughly $30,000 to $120,000. Within the refurbished market there is a clear tier structure. Entry-level systems such as the GE OEC 9600 generation run about $25,000 to $45,000, intermediate systems such as the OEC 9800 and comparable Ziehm platforms run roughly $45,000 to $65,000, and premium systems start around $70,000 and up. Compact full-size units, a middle format between mini and full-size, often run $70,000 to $85,000 refurbished. This is the tier where most surgery centers and orthopedic groups shop, and it is also the tier where the detector choice and the documented history make the biggest difference to both capability and financing.

Full-Size Vascular and Fixed Fluoroscopy

At the top of the category are the full-size vascular and hybrid C-arms and the fixed radiographic-fluoroscopy rooms. Vascular and interventional configurations, which pair a large flat panel detector with digital subtraction angiography and roadmapping software, are the most expensive mobile systems, with high-end new units reaching past $400,000. A fully refurbished Ziehm Vision RFD 3D, for example, has been offered near $149,000. Fixed R/F rooms, which combine radiography and fluoroscopy in a dedicated shielded suite, follow room-style economics closer to a general X-ray room, where a complete installation commonly runs $45,000 at the entry end to $200,000 or more for premium configurations, with fluoroscopy capability pushing toward the higher end. Because these rooms need lead shielding, dedicated power and a compliant build, the site work belongs in the financing conversation. For the radiographic side of that decision, see our X-ray and digital radiography financing guide.

Brands and Models You Will Encounter

A handful of platforms dominate the C-arm market and each has an established parts, service and resale channel that supports value. The GE OEC line is the most widely deployed, spanning the older 9600 and 9800 image intensifier systems, the premium 9900 Elite, and the newer flat panel Elite CFD and OEC One generation, with a refurbished 9900 Elite in a premium 12-inch intensifier vascular configuration commonly landing near $110,000. Siemens Cios covers a range from the flat panel Cios Alpha through the Cios Spin 3D and the more compact Cios Select and Fusion, with a refurbished Cios Alpha carrying a vascular package offered near $69,000 and certified-refurbished units typically running well below new. Philips Zenition is the current Philips mobile platform, succeeding the long-running Pulsera, and it is common in vascular and interventional settings. Ziehm Vision spans the flat panel Vision RFD and RFD 3D and the compact Vision Solo, with refurbished RFD units frequently starting around $70,000. What matters for financing is not the badge but the generation, the detector and the documented condition.

Image Intensifier Versus Flat Panel Detector

The single biggest technical and financial fork in a C-arm purchase is the detector. An image intensifier is the older glass-tube technology that converts X-rays into a visible image, and it remains perfectly capable for a great deal of surgical and orthopedic work at a lower cost. A flat panel detector is the newer digital sensor that delivers a larger square field of view, sharper images and often a lower radiation dose, and it is the standard for vascular and interventional work where image quality is critical. The trade-off is cost. Flat panel systems commonly run $80,000 to $150,000 more than a comparable image intensifier unit when new, and the panel itself is a high-value component that can cost $40,000 to $80,000 to replace if it fails. Because the detector drives so much of the value and the repair exposure, its type and condition are near the top of what any lender evaluates on a used C-arm. A documented flat panel with a healthy detector supports strong terms, while an aging panel of uncertain condition introduces risk that shows up in the structure.

What Lenders Evaluate on a C-Arm

Across every family, a few asset factors carry outsized weight and they are worth documenting before you shop for financing. Detector type and condition come first, because the flat panel or image intensifier is the most expensive and most failure-prone part of the system. Generator hours and tube condition come next, since they indicate wear the way mileage does on a vehicle and a low-hour generator holds far more value than a heavily used one. Software version and license-gated features such as vascular imaging, digital subtraction angiography or 3D reconstruction determine what the unit can do and whether that capability transfers to a new owner, so a current, transferable software load protects both function and value. The C-arm arc range and orbital movement matter for the clinical fit, and a full-motion arc is worth more than a limited one. Finally, service and warranty status is central, because a serviceable C-arm backed by an active or assumable contract holds its value while an unsupported, undocumented unit does not. The more clearly the system is documented, the smoother the financing.

New Versus Refurbished C-Arms

C-arms have one of the deepest refurbished markets in all of medical imaging, so the new-versus-used decision shapes almost every deal. A certified-refurbished C-arm from a reputable remarketer can bring a capable surgical system in at a fraction of new pricing while still carrying a warranty and a documented refurbishment, which is why so many surgery centers and growing orthopedic practices build around used equipment rather than new. The trade-off is that a used C-arm concentrates risk in a few high-value components, meaning the detector, the generator, the tube and the software license, so the age and condition of those pieces matter far more than the model name. A refurbished unit with a healthy detector, low generator hours, current transferable software and a service contract often underwrites as cleanly as a new one, while an undocumented gray-market system of the same model can be difficult to finance at all. It is also worth noting timing. The newest flat panel platforms such as the GE OEC Elite CFD were released only recently and start in the high six figures new, so refurbished examples are still scarce because it typically takes several years before a generation reaches the secondary market in volume. For most buyers the practical path is to compare a new system and a certified-refurbished one side by side on total cost, expected service life and monthly payment, then let the collateral quality rather than the sticker price drive the structure.

How C-Arm Deals Are Structured

Fluoroscopy finance is rarely one-size-fits-all, because a $25,000 refurbished mini C-arm and a $400,000 vascular flat panel system sit at opposite ends of the same category. Smaller units such as a mini C-arm or an entry-level mobile system often qualify for application-only financing on qualifying transactions, where a short application replaces full financial statements and an approval can come back quickly. High-value systems such as premium flat panel, vascular and hybrid C-arms and fixed R/F rooms are usually structured with additional documentation, a term matched to the useful life of the equipment and, where it applies, delivery, installation, training, the extended warranty and the first-year service contract folded into the same schedule. Matching the term to how long the asset will actually earn is central, because a durable surgical C-arm with a serviceable detector supports a longer schedule than a fast-moving analyzer that may be replaced as the technology advances. Many practices also benefit from a payment structure that ramps with the caseload, since a new imaging capability takes time to build surgical volume, so a lighter early payment that steps up as the schedule fills can keep the cash flow sensible. For a surgery center or a multi-site group adding systems over time, a master lease line lets each new C-arm come on as its own schedule rather than starting a fresh application every time, which keeps the paperwork light and the buildout predictable.

Getting Started

Start your application at ileasecapital.com/apply, it takes about three minutes and there is no hard credit pull. The most useful details to have ready are the C-arm family and configuration, whether the system is new, used or refurbished, the brand and model, the detector type, the generator hours, the software version and features, the service or warranty status, the vendor or dealer, the purchase price and any installation or site work. Smaller units such as mini C-arms may qualify for application-only financing, while premium flat panel, vascular and fixed fluoroscopy systems are typically structured with additional documentation and can be presented together with their installation and service costs as one project.

Financing C-Arms and Fluoroscopy Through iLease Capital

iLease Capital works with orthopedic and pain-management practices, surgery centers, vascular and interventional groups and hospitals acquiring new, used and refurbished C-arms and fluoroscopy equipment across every tier. As a broker with more than 50 lender relationships, iLease can match a specific system to a funding partner that understands fluoroscopy collateral and financing may be available for transactions up to $5 million plus. Whether you are financing a mini extremity unit, a refurbished GE OEC 9900 Elite, a Siemens Cios Alpha or a full-size vascular flat panel system with its installation, send the configuration and warranty details, or call us at (866) 545-3273. For the full modality picture, see our medical imaging financing guide.

Frequently asked questions