Haas ST-30 / ST-30Y Turning Center Financing:
ST-30 & ST-30Y Turning Centers.

iLease Capital finances Haas ST-30 and ST-30Y mid-size CNC turning centers. Call (866) 545-3273 with the exact model, year, serial number, options, seller quote and service history. iLease Capital is an equipment-finance broker with 50+ lender relationships and can structure eligible transactions up to $5 million plus.

The direct answer is that haas st-30 / st-30y turning center financing depends on exact Haas generation, spindle, control, options and condition. Brand specificity matters because Super Speed, Y-axis, dual-spindle, probing, coolant and automation can create large value differences inside one Haas family.

Explore the Haas CNC Machine Financing hub.

Start your application at ileasecapital.com/apply, it takes about three minutes and there's no hard credit pull.

Model-Specific Financing Analysis

The current ST-30 is a 10-inch-chuck-class lathe with A2-6 spindle nose, 3.0-inch bar capacity, 3,400 rpm spindle and 30 hp. Haas lists a 9.4 x 32.5-inch XZ envelope. ST-30Y adds 4 inches of Y travel plus milling, drilling and tapping capability.

The ST-30 is a mid-size Haas turning center. Relative to the ST-20 it offers greater bar capacity, while larger-bar ST-35 variants sit above it in the current Haas line. It is best understood as a mid-size 3-inch-bar machine rather than the largest-bore Haas lathe.

As of September 2026, recent marketplace listings place used ST-30 machines roughly in the $45,000 to $85,000 range, with later ST-30Y configurations often reaching $60,000 to $110,000 or more depending on control, live tooling, turret, chuck, probing and automation. New ST-30 and ST-30Y pricing is quote-driven, so call (866) 545-3273 for a current factory quote.

Inspect spindle, chuck, turret indexing, tailstock if equipped, live-tool operation and Y-axis geometry. Bar feeder and parts catcher should be itemized separately.

Current Market Pricing

As of September 2026, this guide uses current manufacturer specifications and recent marketplace listings rather than completed-sale values or formal appraisals. Region, condition, options and configuration can move delivered cost. Asking prices shift with market conditions, call us at (866) 545-3273 for current pricing on a specific machine.

Where This Model Fits in the Haas Lineup

Adjacent Haas models often compete for the same buyer. Travel, spindle, taper, chuck, bar capacity and automation determine whether this exact machine fills a distinct production need. Explain why this model was selected rather than treating every Haas as interchangeable.

What an Institutional Funding Partner Evaluates

An institutional funding partner reviews model, serial number, year, control generation, spindle or spindles, usage, options, seller, condition and secondary-market support. Haas has deep North American visibility but configuration still drives collateral value.

Control Generation

Verify the exact Haas control and software. Later Next Generation Control machines should not be valued from older Classic Haas Control comps without adjustment. Control age can affect connectivity, support and buyer demand.

Spindle Condition

Run spindle warm-up and listen across the speed range. Check taper, drawbar, orientation, vibration and service history. High-speed SS, DT and DM spindles deserve extra attention because replacement cost can be material relative to used value.

Hours and Usage

Power-on hours alone do not describe wear. Capture cycle, feed-cutting or spindle information where available and pair it with service records. A high-hour maintained machine can be stronger than a low-hour crashed machine.

Probing and Tool Setting

Confirm WIPS or other probe hardware, receiver, tool setter, macros and calibration. Probe ready is not the same as a complete functioning probing package.

Through-Spindle Coolant

Confirm TSC pump, pressure option and spindle-union operation. TSC can support deep-hole drilling and chip evacuation but its resale premium varies by model and buyer.

Rotary Readiness

Rotary preparation, drives and actual rotary hardware are different. Record the rotary model and serial number when included. Do not value a prepared machine as a complete fourth-axis package.

Tool Changer

Cycle the changer repeatedly. Check pockets, carousel or side-mount operation, timing and alarms. High-cycle DT/DM and SS machines can expose ATC wear that is not obvious from spindle hours.

Coolant and Chip Management

Inspect pumps, tank, auger or conveyor, washdown and filtration. Large VF machines create greater chip-management demand while production lathes may depend on conveyors and high-pressure coolant.

Automation

Bar feeders, APLs, robots and automatic doors can increase project price. Confirm model, year, interface hardware and recommissioning requirements. Value automation separately when market evidence supports it.

New Versus Used

New Haas equipment provides current configuration and support. Used equipment can potentially be financed when identity and condition are documented. Compare installed cost because rigging, tooling and repairs can change economics.

Dealer, Private Sale and Auction

Dealer machines may include inspection or warranty. Private sales require stronger title and condition diligence. Auctions add buyer premiums and removal deadlines. Obtain the serial number and option list before relying on a comp.

Inspection and Geometry

Run all axes through travel. Check abnormal noise, backlash symptoms and way covers. On larger machines inspect geometry across the full envelope. A ballbar or qualified inspection can be valuable on accuracy-sensitive purchases.

Rigging and Electrical

Confirm weight, dimensions, voltage and transformer requirements. Obtain a rigging quote before closing. VF-6 and gantry machines can cost materially more to move than Mini Mill or DT equipment.

Tooling and Workholding

Vises, chucks, collets, live tooling, rotaries and toolholders can add meaningful cost. Itemize durable tooling included in the acquisition. Do not assume photographed tooling transfers.

Monthly Payment and Structure

Monthly payment depends on equipment, amount, term, borrower profile and transaction structure. iLease Capital does not use one universal rate. Call (866) 545-3273 with the exact Haas quote. Eligible transactions can be structured up to $5 million plus through iLease Capital's 50+ lender network.

Start your application at ileasecapital.com/apply, it takes about three minutes and there's no hard credit pull.

Small-Ticket Versus Large-Ticket Financing

A lower-ticket Mini Mill or older VF can require a streamlined structure because transaction costs are larger relative to purchase price. A six-figure DS, SS or automated cell can justify more detailed equipment diligence.

Collateral Versus Project Cost

Freight, rigging, tooling, training and facility work can increase project cost without adding equal liquidation value. Separate the machine, automation and durable accessories from soft costs where practical.

Comparing Two Used Haas Machines

Compare year, control, spindle, options, hours, service, automation and installed cost. A lower-priced machine can become more expensive if it needs a spindle, probes, tooling or rigging work.

Documentation

Keep quote, serial number, option list, service records, invoices and inspection results. Photograph equipment before deinstallation. Record chuck, turret and bar feeder on lathes plus spindle, ATC, probes and rotary hardware on mills.

Service and Parts

Haas's installed base supports a broad service ecosystem. Still verify support for the exact generation and options. Older electronics, drives or discontinued accessories can affect repair economics.

Depreciation by Generation

Depreciation is not linear. Control changes, spindle packages and redesigns can move older machines down the market. Familiar Haas generations can remain liquid because shops know how to operate and maintain them.

Business Fit

Tie the machine to actual parts, material, envelope and cycle time. VF-6 should earn its floor space through large work. DS should justify its second spindle through operation consolidation. DT-2 should exploit speed.

Purchase Agreement

Identify the serial-numbered machine and material options. Put inspection, spindle-test or geometry requirements in writing when they are conditions of purchase. Confirm title and liens.

Exit Strategy

Consider the future buyer. High-volume Haas models have broad resale pools while gantry and unusual configurations can take longer to place. Preserve option documentation and value-bearing accessories.

Replacement Cost Versus Used Value

A spindle, control board, servo, live-tool assembly or rotary can represent a meaningful percentage of an older machine's value. Obtain repair estimates for known faults before comparing offers.

When a Premium Makes Sense

A premium can be justified by later control generation, low use, Super Speed configuration, probing, TSC, rotary hardware, live tooling, sub-spindle or automation. Demonstrate each important option.

Shop Standardization

Existing Haas shops may value common controls, tooling and service familiarity. A DM-2 can reuse 40-taper tooling while another VF can simplify training. Explain standardization as a business benefit rather than inflating collateral value.

Major Repair Exposure

Ask about spindle replacements, ballscrews, axis motors, drives, turret crashes and control repairs. Review invoices. Cosmetic repainting is not a rebuild.

Production Demonstration

The strongest demonstration cuts a representative part or at least runs spindle, axes, tool changer and relevant options under load. For Y-axis and dual-spindle lathes demonstrate live tools, C-axis, Y motion and both spindles.

Acquisition Budget Beyond Purchase Price

Budget rigging, freight, electrical work, coolant, tooling, workholding, inspection and initial maintenance. Automation may require guarding or integration. Call (866) 545-3273 with the complete project.

Why iLease Capital

iLease Capital is a broker with 50+ lender relationships, not a direct lender. Haas financing should be presented by exact model, year and configuration rather than as generic CNC financing.

Every Haas spoke links back to the Haas CNC Machine Financing hub. Call (866) 545-3273 before a dealer, private-sale or auction deadline.

Used-Machine Title and Serial Verification

Match the serial plate to the invoice and confirm the seller has authority to transfer the machine. Serial identity also helps establish build year and factory configuration. Do not rely only on a reseller's typed specification sheet.

Option Value Versus Buyer Value

An option can have measurable used-market value without being equally valuable to every buyer. High-speed machining, probing, TSC or live tooling should support the intended work. Avoid paying for capability that will remain unused.

Facility Planning

Confirm floor capacity, access path, ceiling clearance, compressed air and electrical service. Measure doors and turns before scheduling freight. Large machines can require machinery skates, crane access or temporary removal of building elements.

Preventive Maintenance After Installation

Plan a baseline inspection after installation. Level the machine, verify lubrication and coolant systems, inspect filters and confirm geometry. A documented commissioning baseline makes later maintenance easier to interpret.

Resale Documentation

Keep factory option lists, invoices, service records and photographs. If a spindle or control component is replaced, preserve the repair documentation. Complete records can make a future buyer more comfortable with an older machine.

Financing a Package

A shop expansion may include the Haas machine, rotary, bar feeder, robot, workholding and other durable accessories. List each major item clearly. Consumable cutting tools and raw material should not be treated like durable CNC collateral.

What to Verify Before a Deposit

Before paying a deposit, request the serial number, full option list, current photographs and a video or live demonstration. Confirm whether the machine is still installed under power. A machine that has already been disconnected is harder to evaluate because spindle, axes, tool changer and optional systems cannot be demonstrated normally.

Ask whether the seller will permit an independent inspection. Confirm the removal date and who is responsible for deinstallation. If the transaction depends on a successful inspection, make that condition part of the purchase agreement rather than relying on an informal understanding.

Haas Options That Can Change the Deal

Haas machines are highly configurable. Two machines with the same model and year can differ materially because one has probing, high-speed machining, through-spindle coolant, a side-mount tool changer, rotary preparation, chip conveyor or automation while the other is close to base specification.

Request the factory option list when possible. Verify that software-enabled options remain active and that physical hardware is present. Price the missing options the buyer actually needs before concluding that a stripped machine is the cheaper choice.

Crash History and Repair Evidence

Ask directly about spindle crashes, tool-change crashes, turret crashes and axis repairs. Inspect sheet metal and way covers for impact evidence but do not rely on appearance alone. A repaired crash can leave a machine fully productive when the work was performed correctly.

Where accuracy matters, use geometry checks to confirm the result. Review service invoices for spindle, ballscrew, encoder or turret work. The financing analysis should reflect present condition rather than assuming any machine with a repair history is unacceptable.

Timing a Used Haas Purchase

Used Haas inventory can move quickly because many shops understand the control and maintenance ecosystem. That liquidity is helpful but it should not pressure the buyer into skipping diligence. Obtain the information needed for financing as soon as the machine is identified.

Call (866) 545-3273 with the seller quote, serial number and option list. Early documentation can help the financing process move alongside inspection and purchase negotiations instead of beginning after the seller expects payment.

Tax and Accounting Coordination

Equipment financing structure can interact with the buyer's accounting and tax planning. Those decisions should be reviewed with the buyer's tax and accounting professionals. iLease Capital does not replace that advice.

From an equipment perspective, keep the invoice detailed. Separating the machine, automation, durable accessories, freight and other project costs gives the buyer and funding partner a clearer record of what was acquired.

Frequently asked questions