Horizontal Injection Molding Machine Financing:
100-500 Ton Presses.

The direct answer is that used horizontal injection molding machines in roughly the 100 to 500-ton class can often be financed when the exact asset, seller and condition are documented clearly. This cluster is built around the $40,000 to $80,000 used-equipment sweet spot although individual transactions can be smaller or larger.

iLease Capital is an equipment-finance broker, not a bank. We work across 50+ lender relationships and match each transaction to an institutional funding partner based on the borrower, equipment and seller. Call (866) 545-3273 to talk through your options with a specialist who understands the equipment. Start your application at ileasecapital.com/apply, it takes about three minutes and there's no hard credit pull.

What a Lender Evaluates First

The direct answer is clamp tonnage, shot capacity, screw diameter, platen size, tie-bar spacing, controller, screw and barrel wear, clamp and tie bars, hydraulic or electric drive and cycle history. Common equipment in this category includes Arburg ALLROUNDER, Engel, Nissei, Sumitomo (SHI), Shibaura Machine, Husky, Milacron and JSW horizontal presses. Recognizable manufacturers include Arburg, Engel, Nissei, Sumitomo (SHI), Shibaura Machine, Husky, Milacron and JSW.

The lender is financing a specific asset rather than a category name. A quote that says only "excavator," "telehandler" or "injection molding machine" leaves important collateral questions unanswered. The full model, serial number, year, hours or cycles and configuration should be provided at the start.

A strong file also explains why the buyer selected the equipment. Replacing a rental unit, adding excavation capacity, taking concrete work in-house, adding molding tonnage or launching a new mold program are concrete business reasons. The lender does not need confidential customer information to understand how the asset fits operations.

Why Horizontal Press Configuration Matters

The direct answer is that the mold has to fit and the injection unit has to deliver the required shot. Clamp tonnage is only the first filter. Tie-bar spacing, platen dimensions, mold thickness range, daylight, ejector pattern, nozzle interface, screw diameter and shot capacity determine whether the machine can run the buyer's molds.

For financing, provide the machine specification sheet or serial-specific configuration. A listing that says "300 ton" is not enough.

Arburg ALLROUNDER Generations

Arburg ALLROUNDER machines appear across hydraulic, hybrid and electric generations. Used listings may reference older B4 or B6 controller language and SELOGICA-related controls. Later Arburg machines use the newer GESTICA control, which has largely superseded SELOGICA.

The lender should receive the exact ALLROUNDER model designation because Arburg's numeric model names encode machine size and injection-unit configuration in ways that are more specific than tonnage alone.

Engel CC200 and CC300

Engel used horizontal machines span several product families and controller generations. CC200 and CC300 are recognizable controller references in the used market. An Engel victory, duo or e-motion machine is not interchangeable simply because clamp tonnage overlaps.

Tie-bar-less Engel victory designs also differ mechanically from conventional four-tie-bar presses. That distinction can matter for mold access and buyer demand.

Nissei, Sumitomo, Shibaura, Milacron and JSW

Nissei and Sumitomo have deep all-electric and hydraulic histories. Toshiba Machine changed its corporate name to Shibaura Machine in 2020. Used Toshiba-branded presses therefore remain common even though current equipment may carry Shibaura branding.

Milacron horizontal presses span multiple hydraulic and electric generations while JSW is strongly represented in electric molding. Husky systems can be more production-cell oriented and may appear in higher-output packaging applications.

Screw, Barrel and Clamp Condition

The direct answer is that screw and barrel wear can directly affect process consistency. Ask for resin history because abrasive glass-filled material can accelerate wear. A screw pull and measurement is more informative than hours alone when wear is a concern.

Inspect tie bars for scoring, clamp platen condition, bushings, lubrication and mold-protection function. On hydraulic machines inspect oil, pumps, valves and leaks. On electric machines inspect servo alarms, ball screws and drive history.

What Makes One Unit More Financeable Than Another

The direct answer is a supportable asset plus a clean transaction. Recognizable manufacturer, useful configuration, documented condition, active parts support and a credible seller all help an institutional funding partner understand collateral. Age by itself is not a verdict. A maintained older unit with service records can present better than a newer asset with unresolved faults.

Purchase price is not automatically collateral value. If the package includes attachments, molds, tooling, automation or accessories, itemize them. If a dealer has refurbished the equipment, describe what was inspected or replaced and whether any warranty transfers. Known defects should be disclosed with repair estimates when possible.

The requested $40,000 to $80,000 sweet spot is attractive because many used-equipment transactions are large enough to justify financing while still being small enough that buyers value a fast process. It is not a guaranteed approval band. Credit, time in business, equipment, seller and transaction structure still matter.

Used Equipment Inspection Before Closing

The direct answer is to inspect the systems that create the equipment's value. Start from a cold machine when practical. Review active alarms and maintenance warnings before the seller clears them. Run the equipment long enough to reach normal operating temperature because hydraulic, transmission, servo and cooling problems may appear only when hot.

Photograph the serial plate, hour or cycle meter, control and major wear areas. Ask for service records and invoices for major work. If a dealer says the equipment is refurbished, request a written refurbishment scope. The word refurbished is not useful collateral evidence without a description of the work.

If an accessory contributes to price, demonstrate it. A bucket, coupler, bar feeder, rotary table, hot-runner controller, robot or attachment shown in listing photographs is not necessarily included. Separately serialized assets should appear on the invoice.

Dealer, Auction and Private-Party Purchases

The direct answer is that all three seller channels can potentially work but documentation changes. Dealers usually provide a formal invoice, serial number and defined sale terms. Auctions add buyer premiums, short payment deadlines and removal requirements. Private-party purchases require more attention to seller ownership and equipment verification.

Start financing before bidding or making a nonrefundable commitment. Send the quote or lot description, serial number, seller and intended purchase amount. iLease Capital is a broker with 50+ lender relationships so the goal is to match the transaction with an institutional funding partner whose equipment and credit policy fits the deal.

Monthly Payment and Cash-Flow Planning

The direct answer is to compare the expected monthly payment with realistic production value. The approved monthly payment depends on the amount financed, term, borrower profile, equipment and structure. This article does not quote an APR.

A contractor might justify equipment through reduced rental expense, more jobs completed with owned equipment or less subcontracting. A manufacturer might justify a molding press through additional capacity, lower scrap, cycle-time improvement or a new production program. Use realistic utilization rather than assuming the equipment runs every available hour.

What You Should Have Ready to Apply

The direct answer is a complete quote and enough equipment detail to eliminate ambiguity. Have the legal business name, ownership information, seller contact, exact model, serial number, year, purchase price and included accessories ready. Add photos, hours or cycle count, service records and a running video when available.

Depending on transaction size and credit profile, an institutional funding partner may request bank statements, tax returns, interim financials or other business information. Have those records accessible before an auction or seller deadline.

Include costs needed to put the asset into service. Construction equipment may need attachments, delivery or transport. Molding equipment may need rigging, freight, electrical work, water systems, dryers, chillers, robots, mold-temperature control and tooling. A complete project is easier to evaluate than an equipment invoice followed by unplanned additions.

Start your application at ileasecapital.com/apply, it takes about three minutes and there's no hard credit pull. Call (866) 545-3273 if a seller deadline is driving the timing.

Documentation That Prevents Funding Delays

The direct answer is that the invoice must match the physical asset. It should show seller legal name, buyer legal name, model, serial number, purchase price and included accessories. Deposits, trade-ins and payoffs should be stated clearly.

For an auction, retain the bidder invoice and buyer-premium detail. For a private seller, be prepared to document ownership and lien status. For a dealer, put refurbishment and warranty language in writing.

Have the destination address, delivery plan and expected closing date ready. If the equipment has an existing lien, resolve it before the seller expects funds. A clean documentation package does not guarantee approval but it removes avoidable questions.

Why iLease Capital's Broker Model Matters

The direct answer is that equipment categories do not all fit the same credit box. iLease Capital is not a bank and does not fund every transaction from one balance sheet. We work through 50+ lender relationships and match the borrower, equipment, seller and requested structure to an appropriate institutional funding partner.

That matters when the collateral is specialized. A lender comfortable with compact construction equipment may evaluate an injection mold differently. A lender familiar with manufacturing machinery may understand an all-electric molding press better than a general commercial lender. The broker's job is to present the transaction accurately and route it intelligently.

Financing is available for transactions up to $5 million plus, subject to credit approval. Call (866) 545-3273 to talk through the exact equipment and seller before you commit to a purchase.

Building a Strong Business Case for the Purchase

The direct answer is to connect the asset to work the business already understands. A contractor can explain whether the equipment replaces rental expense, reduces subcontracting, adds a crew or allows the company to bid a class of job it currently passes on. A molder can explain whether the machine or tool adds tonnage, supports a customer launch, replaces an unreliable press or reduces secondary operations.

Keep the explanation operational. State the normal job type, material or production role at a high level. If the asset will replace an existing unit, identify the operational problem with the old equipment. If the purchase adds capacity, explain whether demand already exists or the machine supports a specific planned program.

This context helps distinguish a correctly configured asset from a cheap asset. The lowest purchase price is not automatically the best financing transaction. Equipment that can enter production quickly with local support and the right attachments or tooling may be a stronger business decision even at a higher price.

Installation, Delivery and Commissioning

The direct answer is to plan the move before closing. Construction equipment may be simple to transport but width, weight, permits and trailer capacity still matter. Specialized concrete or paving equipment can require a commercial carrier. Injection molding machines can require machinery riggers, electrical work, cooling water, compressed air and substantial floor access.

Verify machine weight and utility requirements from the exact manufacturer documentation. Do not rely on the specifications of a similar machine already in the shop.

If the asset is disconnected, document what was demonstrated before removal. Save running videos, inspection reports and service records. A disconnected machine is not necessarily poor collateral but the financing file should accurately state what could and could not be tested.

Frequently asked questions