PerkinElmer Avio ICP-OES Financing

iLease Capital finances PerkinElmer Avio ICP-OES systems. Call (866) 545-3273 with the exact model, configuration, seller quote and service history. iLease Capital is an equipment-finance broker with 50+ lender relationships and can structure eligible transactions up to $5 million plus.

The direct answer is that perkinelmer avio icp-oes financing depends on the exact platform, generation and configuration. Detector, sample introduction, accessories, software and service history can change both purchase price and collateral value.

Start your application at ileasecapital.com/apply, it takes about three minutes and there's no hard credit pull.

Platform Covered

This page focuses on Avio 500, Avio 550 and Avio 560 Max ICP-OES platforms.

Avio is the optical-emission side of PerkinElmer elemental analysis and should not inherit ICP-MS pricing. It is widely used for environmental, mining, food, pharmaceutical and industrial multi-element analysis.

Avio's Flat Plate plasma technology is a meaningful platform characteristic. Verify torch, injector, nebulizer, spray chamber, detector, optics, RF/plasma hardware, chiller and autosampler. The condition of sample-introduction components can affect startup cost even when they are replaceable wear items.

Avio 500 is an established generation with visible secondary-market activity. Avio 550 is a later platform. Avio 560 Max is the current top-tier ICP-OES model in the family, so identify the exact generation on the nameplate rather than assuming it from the 500 or 550 lineage.

Current New and Used Market Pricing

As of September 2026, recent marketplace listings included a used Avio 500 at about $37,000 that passes OEM diagnostics. Beyond that specific data point, used Avio ICP-OES pricing is configuration-dependent and varies with generation, torch and sample-introduction condition, detector, autosampler, chiller, software rights and geography, so a single quoted figure rarely transfers cleanly from one system to another. New and used pricing for the Avio 550 and the current Avio 560 Max is quote-driven and should be confirmed against the actual build sheet rather than anchored to any published band. Treat each seller number as specific to that exact configuration and support package.

Asking prices shift with market conditions, call us at (866) 545-3273 for current pricing on a specific machine.

Why This Platform Holds Value

PerkinElmer has a long installed base in elemental analysis, chromatography and spectroscopy while Revvity carries important life-science detection platforms after the corporate separation. Existing validated methods, trained users and service relationships can support secondary demand. Exact model, configuration and current product ownership matter more than the umbrella brand name.

Brand and Product Ownership

The PerkinElmer/Revvity transition requires precision. In 2023 the former PerkinElmer company became Revvity after divesting its analytical and enterprise-services business. The divested analytical business continued under the PerkinElmer name. Life-science detection equipment can therefore appear under legacy PerkinElmer badges while current commercial ownership is Revvity. Describe the actual asset accurately.

What Lenders Evaluate

Identify the core instrument, exact model, serial number, year when available and every major module. Record detectors, sources, autosamplers, chillers, pumps, accessories, workstations and software separately. Request service history and recent performance evidence. A complete supported system is stronger collateral than an incomplete chassis.

Configuration Completeness

Ask whether every component needed for the intended workflow is included. ICP systems can require autosampler, chiller and sample-introduction hardware. GC-MS can require headspace or thermal desorption. Plate readers can have expensive optical modules or stackers. LAMBDA systems can include integrating spheres and specialty sample compartments. Put major components on the purchase agreement.

New Versus Used or Refurbished

New equipment provides a current configuration and clear support path. Used equipment can potentially be financed when identity, condition and market support are documented. Refurbished should mean specific work. Ask what was tested, calibrated, cleaned or replaced and what warranty is included. Dealer support can justify a premium when it is documented.

Software and Data Systems

Software is essential but transfer rights should never be assumed. Syngistix, TotalChrom, Kaleido and platform-specific software may have version or licensing constraints. A computer shown with the equipment does not prove license transfer. Confirm the workstation operating system, software version and any database or compliance modules needed after closing.

Service Contracts and Support

Confirm whether the current service agreement transfers. If not, obtain a post-sale inspection or coverage quote. Service history still helps establish maintenance discipline. Older analytical platforms may have strong independent service support while newer or specialized systems can depend more heavily on manufacturer service.

Inspection Before Purchase

Inspect failure points specific to the technology. ICP requires cones, torch, nebulizer, detector, optics and vacuum review as applicable. GC-MS requires inlet, source, detector and vacuum checks. AA requires furnace or flame-system inspection. Plate readers require optics and plate transport. UV/Vis/NIR requires source, detector and accessory review.

Major Repairs and Wear Components

Request invoices for major repairs. A replaced detector, vacuum pump, RF component, furnace, optical module or autosampler can reduce uncertainty around one subsystem. Wear items should be budgeted separately rather than treated as reasons to reject a used instrument. Documented maintenance deserves more weight than a seller's verbal assurance.

Dealer and Private-Party Purchases

Dealer transactions can include refurbishment, warranty, installation or qualification. Private laboratory sales can offer value but need stronger diligence. Confirm ownership and serial numbers. Ask whether the instrument remains installed for demonstration. Identify anything shown in photographs that is excluded and resolve liens or software questions before funding.

Auction and As-Is Purchases

Auction equipment can potentially be financed but analytical-equipment deadlines move quickly. Review buyer premium, payment deadline, removal rules and whether the system can be demonstrated. Budget specialized deinstallation, packing and freight. The 2022 Clarus example shows how liquidation pricing can sit far below dealer retail and should not be used blindly as a normal-market comp.

Installation and Site Requirements

Delivered cost is not installed cost. ICP requires gases, exhaust and often cooling. GC-MS may need gases, vacuum support and sample-introduction utilities. AA requires appropriate gases and ventilation. Plate readers may require automation integration. Identify site work before closing so the acquisition budget reflects equipment entering service.

Monthly Payment and Structure

Monthly payment depends on equipment, amount, term, borrower profile and transaction structure. iLease Capital does not use one universal rate. Choose the platform based on analytical fit first. Then evaluate monthly payment for the actual configured asset. Call (866) 545-3273 with the seller quote. Eligible transactions can be structured up to $5 million plus through iLease Capital's 50+ lender network.

Start your application at ileasecapital.com/apply, it takes about three minutes and there's no hard credit pull.

Collateral Value Versus Project Cost

Purchase price and collateral value are related but not identical. Installation, software, training, qualification and service can increase project cost without adding dollar-for-dollar liquidation value. Separate durable hardware from soft costs where practical. Explain a premium with specific configuration, warranty or refurbishment differences.

Comparing Two Systems

Compare exact generation, detector, autosampler, accessories, software, service history, warranty and delivered installed cost. A lower-priced system can become more expensive if it lacks a chiller, autosampler, software or critical optical module. A complete older system can be a stronger acquisition than a newer stripped instrument.

Documentation That Supports Value

Keep the original quote, serial numbers, module list, service reports, calibration records and major repair invoices. Photograph the installed system and status screens before deinstallation. Record expensive accessories individually. Complete documentation helps an institutional funding partner understand the collateral and supports future resale.

Deinstallation and Shipping

Use technicians familiar with the platform when practical. ICP and GC-MS require controlled shutdown and protection of sensitive components. Optical instruments need careful packing and realignment after transport. Photograph condition before pickup and at delivery. High-value equipment should have appropriate freight insurance.

Method Fit Before Financing

Confirm that sensitivity, wavelength range, detector, throughput and sample handling fit the intended method. Regulatory methods can make an older technology economically necessary even when a newer technique exists. Budget validation or method-transfer work when changing platforms. Financing the wrong analytical technology is not a savings.

Market Liquidity

Secondary-market depth varies. Routine AA, GC and UV/Vis can have broad buyer pools. Current ICP-MS and high-throughput detection platforms have higher values but narrower configuration-specific markets. Liquidity should be judged by exact model and package rather than by one PerkinElmer or Revvity depreciation assumption.

Planning the First 90 Days

Budget installation, calibration, qualification, preventive maintenance and method transfer. Ask what service is due next. A used instrument can be attractively priced while still needing cones, torches, lamps, pumps, sources or software work. A startup reserve helps prevent predictable maintenance from becoming an operating interruption.

Protecting Future Resale

Maintain the equipment on schedule and retain records. Keep proprietary accessories, manuals, computers and software documentation with the system. Record upgrades and major repairs. A complete configuration with traceable history gives the next buyer a stronger basis for valuation.

Why iLease Capital

iLease Capital is a broker with 50+ lender relationships, not a direct lender. PerkinElmer and Revvity equipment should be presented by exact platform and configuration rather than as generic laboratory equipment.

Call (866) 545-3273 before a dealer, private-sale or auction deadline so the financing discussion can use the actual system.

Final Purchase Review

Before signing, match the quote to the physical system. Confirm model, serial number, detector or optical configuration, autosampler, workstation and every high-value accessory.

Ask the seller to identify anything shown in photographs that is excluded. Confirm responsibility for deinstallation, packing, freight, insurance and reinstallation.

If software or service is essential, obtain written confirmation of post-sale rights and expected cost. A short pre-purchase technical review can be inexpensive compared with discovering a missing module after delivery.

Understanding a Premium Asking Price

A premium can make sense when it is tied to measurable differences such as later generation, upgraded detector, complete autosampler package, specialized optics, recent major service, dealer refurbishment or warranty.

Do not accept a premium simply because a seller describes the equipment as excellent. Compare the cost of adding missing capability or repairing the lower-priced alternative after closing.

Current manufacturer support and documented service can be more important than cosmetic appearance on analytical equipment.

Seller Demonstration Checklist

A useful demonstration should show more than power-on status.

Ask the seller to demonstrate normal startup and the functions that matter to the workflow. Review active errors and recent maintenance. Request a representative calibration, diagnostic or performance check when practical.

Record the demonstration date and exact configuration. If the instrument is already deinstalled, request the last performance report and shutdown documentation. The lack of a live demonstration increases uncertainty.

Acquisition Budget Beyond the Instrument

The seller price is only one part of the project. Budget deinstallation, specialized packing, freight, insurance, site preparation, installation, calibration and initial service.

ICP and AA may need gases, exhaust and cooling. GC-MS needs gases and vacuum support. Plate readers may require automation integration. Spectrophotometers can need expensive sampling accessories.

Build those costs before comparing monthly payment options. A lower purchase price can create a higher total project cost when the system is incomplete.

Questions to Ask Before Funding

Ask why the instrument is being sold and when it last operated normally. Confirm current service status and whether there are unresolved faults.

Request the original configuration or build sheet when available. Compare it with the physical equipment and seller quote. Ask what the buyer must purchase separately on day one.

That final question often exposes missing software, autosamplers, chillers, detectors or accessories before the transaction closes.

Bundling Multiple Laboratory Assets

A laboratory may acquire a NexION and Avio together or combine analytical equipment with plate readers and spectroscopy in a broader buildout.

A financing package can potentially include multiple durable assets when each major item is clearly identified. Separate consumables, reagents, standards and routine supplies from equipment.

Bundling should not hide configuration detail. List serial-numbered instruments and high-value accessories so the collateral package remains understandable.

Frequently asked questions