Orthodontic & Specialty Dental Equipment Financing:
Ortho, Oral Surgery, Endodontics and Lasers.

iLease Capital finances new, used and refurbished orthodontic and specialty dental equipment, from orthodontic imaging and CBCT to intraoral scanners, in-office aligner 3D printers and thermoforming stations, oral surgery suites, endodontic microscopes, periodontal and implant equipment, sedation gear and dental lasers. Specialty offices are built differently from a general practice. An orthodontic or oral surgery office may run only one to three chairs yet carry the bulk of its investment in a few high-value imaging and digital assets, which is exactly why the equipment deserves a lender who understands the collateral. If you are pricing a specialty setup, new or used, you can talk it through with a specialist at (866) 545-3273.

iLease Capital finances equipment for orthodontic, oral and maxillofacial surgery, endodontic, periodontal, implant and pediatric practices, so financing may be available for transactions up to $5 million plus with no minimum floor. As a broker with more than 50 lender relationships rather than a single direct lender, iLease can match a specialty setup to a funding partner that understands where the value sits in an ortho or surgical office, which matters because a lender who treats a CBCT or an in-house aligner bundle like generic office equipment will misjudge both the value and the monthly payment. This guide breaks specialty dental down by category, with current market price ranges, what lenders look at and how the in-house aligner trend and multi-location growth fit into the financing. For the broader picture, see our dental equipment financing hub.

Orthodontic Imaging and CBCT

Imaging is where an orthodontic office concentrates much of its capital. A panoramic and cephalometric X-ray system commonly runs $30,000 to $50,000 new, while a system built on a cone beam CT platform that also captures a 2D ceph often runs $75,000 to $100,000, with full ortho-focused CBCT configurations reaching higher depending on field of view and software. Refurbished pan and ceph units are widely available, commonly in the $15,000 to $30,000 range, which makes imaging a workable used purchase as well as a new one. Brands in this space include Planmeca, Dentsply Sirona and Carestream, so the exact configuration, sensor and software generation affect both capability and resale value. Because imaging carries strong secondary value, it tends to anchor a specialty financing package. Where a compliant room, shielding or dedicated power are part of the install, those costs can often be presented alongside the equipment so the financing reflects the full project rather than the bare hardware.

Intraoral Scanners for Clear-Aligner Workflows

The intraoral scanner is the center of a modern orthodontic and clear-aligner workflow, replacing physical impressions with a digital scan that feeds treatment planning, aligner design and in-office printing. Ortho-class scanners commonly run $20,000 to $50,000 new, with certified pre-owned units frequently available around $15,000 to $25,000, often 30 to 50 percent below new. Brands here include 3Shape, Planmeca, Dentsply Sirona and Carestream. One financing nuance is worth flagging: most scanners carry an ongoing software or subscription cost that is separate from the hardware, so it is cleaner to finance the scanner as a capital asset and treat the recurring software as an operating expense rather than folding a subscription into the equipment value. Because scanners hold resale value well, they make solid collateral and are among the easier specialty items to finance.

In-Office Aligner Printing and Thermoforming

Bringing aligner production in house is the defining trend in orthodontics right now, so it reshapes the financing conversation. The core setup pairs a scanner with a 3D printer and a thermoforming station. In-office printers commonly run from roughly $2,500 for a compact chairside model to $17,000 for a direct-print aligner system, with model-printing units generally in the $10,000 to $12,000 range and direct-print aligner platforms nearer $15,000 to $17,000. Brands in this space include Formlabs, SprintRay and Asiga. Used printer pricing is thinner and more variable, so treat any secondary figure as a rough estimate rather than a firm number. Most in-office resin printers have weak standalone resale value, so rather than financing a printer in isolation it usually makes sense to finance the complete aligner workflow as one bundle: the scanner, the printer, the thermoformer and the software. Practices justify that bundle against the outsourced-lab and third-party aligner fees it displaces. Financing keeps the capital off the operating account while the workflow pays for itself in reduced case fees over the treatment volume it supports.

Orthodontic Chairs and Treatment Bays

Compared with imaging and digital equipment, chairs are a smaller share of an ortho office budget, but the open-bay layout common in orthodontics still represents real cost. An orthodontic office typically runs an open treatment bay with multiple chairs rather than closed operatories, so the fit-out covers chairs, delivery units, doctor and assistant stools plus the cabinetry and utilities that serve the bay. These items hold moderate resale value and are usually financed as part of the overall buildout rather than on their own. For a practice opening or expanding a bay, the chairs and delivery systems pair naturally with the imaging and digital package in a single financing conversation, which keeps the whole project on one predictable payment.

Oral Surgery, Implant Motors and Piezosurgery

Oral and implant surgery equipment mixes durable capital assets with consumable-heavy, system-locked items, so the distinction matters for financing. An implant motor commonly runs $4,000 to $9,000, with a system-specific surgical implant kit adding roughly $6,500 to $9,500. Piezosurgery units for bone surgery generally run in the $7,000 to $13,000 range new, though that figure is an estimate that varies by configuration, so treat it as approximate. The important financing point is resale. Implant kits are locked to a single implant system and are not readily resold. They also commit the practice to recurring drills, implants and abutments, so the durable core such as the motor and the surgical chair carries the collateral while the kit and consumables are folded into a blended package. Used implant motors and piezo units do trade, but secondary pricing is thin, so any used figure should be treated as a rough guide rather than a firm quote.

Endodontic and Surgical Microscopes

Surgical and endodontic microscopes span a wide band, which is why it helps to tier them by specialty. New systems commonly run $15,000 to $45,000 or more, with premium optics at the top of that range, while used units are actively traded from roughly $3,600 into the low teens depending on the optics, stand and documentation. Endodontists and oral surgeons tend to justify the high end, where magnification and optical quality directly support the procedure, while a general specialist may be well served by a mid-tier or certified used unit. Microscopes hold their value reasonably well and make workable collateral, so a documented, serviceable unit is straightforward to finance new or used. The wide band also means there is usually a configuration that fits both the clinical need and the budget.

Periodontal, Implant and Soft-Tissue Equipment

Periodontal and implant practices combine surgical equipment, imaging and increasingly digital planning, so their financing often looks like a scaled version of the oral surgery profile. Implant planning leans on CBCT imaging and intraoral scanning, the surgical side uses implant motors and piezosurgery, while soft-tissue management often brings in a dental laser. The durable, high-value pieces, meaning the imaging, the scanner and the surgical motors, carry the collateral, while system-locked kits and consumables sit inside the package. A periodontal or implant office building out a full surgical and digital workflow is a natural fit for financing the project as a whole, since the individual pieces reinforce each other clinically and the combined scope is easier to structure than a series of one-off purchases.

Sedation and Anesthesia

Sedation capability is common in oral surgery, implant and pediatric settings, where it ranges from nitrous oxide delivery to IV sedation and monitoring equipment. A nitrous oxide setup is a modest add, frequently in the $2,500 to $8,000 range depending on the configuration, with monitoring and IV sedation equipment layered on for practices that offer deeper sedation. The financing consideration here is resale, because nitrous and sedation gear hold little secondary value, so these items are typically financed inside a blended package anchored by higher-value equipment rather than on their own. For a practice adding sedation as part of a larger surgical or pediatric buildout, that is a natural way to include it without treating it as standalone collateral.

Soft-Tissue and Hard-Tissue Dental Lasers

Dental lasers split into two families. Soft-tissue diode lasers are the more accessible tier and are used for gingival contouring, periodontal therapy and minor soft-tissue procedures, while hard-tissue lasers, typically erbium systems, can cut both soft tissue and enamel or bone and sit at a meaningfully higher price point. Lasers are a common addition in periodontal, oral surgery and pediatric practices, where they support less invasive procedures and can bring services in house. Because the resale market and the model range vary widely, it is best to price a specific laser against its intended clinical use rather than a category average. A soft-tissue diode is a modest add that many practices treat almost like an accessory purchase, while a hard-tissue erbium platform is a more substantial commitment that is usually weighed against the procedures it brings in house. Where a laser is part of a larger surgical or specialty buildout, it slots naturally into the overall financing package alongside the imaging and surgical equipment.

Pediatric-Specific Setups

Pediatric dentistry skews toward the operatory buildout, so it looks closer to a general-dentistry profile than to the imaging-heavy orthodontic model. A pediatric operatory commonly runs in the $25,000 to $60,000 range new, with used operatories often available from roughly $10,000 to $30,000. A nitrous oxide addition typically runs the figures noted above. Because pediatric offices invest across multiple operatories plus child-friendly fit-out, they pair naturally with startup and expansion financing that spreads the buildout across predictable monthly payments. Note that used pediatric operatory and sedation figures vary considerably by condition and configuration, so treat them as broad ranges rather than firm quotes when planning a project.

What Lenders Evaluate on Specialty Dental Equipment

Across every specialty, a few factors carry outsized weight. First is where the value sits, because a specialty office concentrates capital in a small number of high-value assets, so the imaging system, the scanner and the CBCT drive the deal more than a wide fit-out does. Second is resale strength: imaging, intraoral scanners and microscopes hold value well and make workable collateral, while implant kits, sedation gear and most in-office resin printers hold little standalone value and are financed inside a blended package. Third is the software and subscription picture, since scanners and imaging carry recurring costs that are cleaner kept separate from the equipment value. Fourth is documentation and serviceability, because a documented, serviceable used unit supports better terms than an unknown gray-market one. The clearer the equipment and its support status, the smoother the financing.

Financing In-House Aligners and Multi-Location Growth

Two trends define specialty dental financing right now: the move to in-house aligner production and multi-location group expansion. On the aligner side, the smart approach is to finance the workflow as one bundle, meaning the scanner, the printer, the thermoformer and the software together, then to justify it against the outsourced-lab and third-party case fees it displaces, so the monthly payment is measured against real savings rather than treated as a bare equipment cost. On the growth side, multi-chair and multi-location groups usually finance in phases, presenting a standardized rollout of scanners, printers and imaging so each office is equipped consistently while the practice keeps working capital for staffing and buildout. In both cases, putting the full scope on one quote lets the financing be structured to match the project. It also keeps a specialty practice from funding high-value equipment out of pocket.

Getting Started

Start your application at ileasecapital.com/apply, it takes about three minutes and there is no hard credit pull. The most useful details to have ready are the category and configuration, whether the equipment is new, used or refurbished, the age and software version on imaging or scanners, the vendor or dealer, the purchase price plus whether the project bundles several items such as a full aligner workflow or a multi-chair rollout. Smaller specialty purchases may qualify for application-only financing, while larger multi-location or full surgical suites are typically structured with additional documentation and can be presented as one project.

Financing Specialty Dental Through iLease Capital

iLease Capital works with orthodontic, oral surgery, endodontic, periodontal, implant and pediatric practices acquiring new, used and refurbished equipment across every specialty category. As a broker with more than 50 lender relationships, iLease can match a specialty setup to a funding partner that understands where the value sits in an ortho or surgical office, so financing may be available for transactions up to $5 million plus. Whether you are building an in-house aligner workflow, adding a CBCT, equipping a surgical suite or standardizing several locations, send the configuration and the full project scope, or call us at (866) 545-3273. For the full range of dental categories, see our dental equipment financing hub.

Frequently asked questions