Trumpf Press Brake Financing:
TruBend 3000, 5000 and 7000.

A Trumpf press brake is usually the machine a fabrication shop bends its whole business around. It sets the throughput ceiling on formed parts, it decides how many operators the floor needs and it holds value on the used market better than almost anything else a shop will buy. Trumpf sits at the premium end of the bending market, and the price tags reflect that. A well-configured TruBend with a high-axis backgauge and automatic angle measurement can run deep into six figures new, which is why most shops finance the machine rather than drain working capital to own it outright. That is where structured equipment finance earns its place.

We finance new and used Trumpf press brakes, from a single machine up to $5 million plus. iLease Capital arranges financing across the full TruBend range, from a compact high-speed 7000 series brake to a value-oriented 3000 series machine or a workhorse 5000 series unit. We work through a network of lenders and funding partners that understand fabrication equipment, hold their residual value assumptions to real market data and can build terms around your production calendar rather than a generic amortization table. Deals run up to $5 million plus, and there is no artificial floor on what we will look at. This page walks through how the TruBend lineup is structured, what the controls and bending technology change for a buyer, what these machines actually trade for used and how we structure the financing.

Why the TruBend line holds its value

Financing decisions on capital equipment hinge on collateral. A lender is more comfortable, and usually more flexible, when the underlying machine keeps a strong resale value across the term of the loan or lease. The TruBend line is one of the clearer examples of that dynamic in fabrication.

Used TruBend brakes trade actively across a wide ladder, from older hydraulic machines at the value end up to recent units with modern controls and high-axis backgauges. Late-model machines in particular retain a meaningful share of their original price years after they were built, which is exactly the collateral profile that makes a deal easier to structure. Trumpf reinforces this with a factory refurbishment channel and resale program for pre-owned machines, so genuine parts, documented service history and a manufacturer-backed path all support the collateral case that sits behind an approval. It also gives you a real exit if your production needs change before the brake reaches end of life.

Value retention is not uniform across the range. A newer machine with the current control and a scalable backgauge holds value best, while an older hydraulic unit with a dated control drops further over time, which is normal for the category. We factor that spread into the structure we recommend, matching term length to how the specific machine is likely to age.

TruBend Series 3000: the value tier

The TruBend Series 3000 is the price-performance tier, built to pair Trumpf build quality with an attractive entry cost. Trumpf positions it as selected premium features at a reasonable price rather than a stripped-down machine. The current US models, the TruBend 3100, 3130 and 3170, deliver press force from roughly 1000 to 1700 kilonewtons, which works out to about 112 to 191 US tons. Bending length runs 3230 millimeters on the 3100 and 3130, a little over ten and a half feet, and stretches to 4250 millimeters, around fourteen feet, on the 3170.

The 3000 series carries a four-axis backgauge as standard that is scalable to five axes, along with the Touchpoint TruBend control. The optional ACB Laser angle measuring system reads the bend optically to roughly plus or minus three tenths of a degree, which helps get the first part in tolerance rather than dialing it in after several test bends. For a shop standing up its first Trumpf brake, or adding bending capacity without stretching the budget, the 3000 is usually the entry point.

Older machines in this family often carry the TruBend 3120 designation, where the number tracks tonne-force, so a 3120 is a roughly 120 tonne, about 135 US ton, machine. Those units show up regularly on the used market and remain productive brakes, so the 3000 family gives a buyer a real spread of new and used options at the value end of the Trumpf range.

TruBend Series 5000: the workhorse

The TruBend Series 5000 is described by Trumpf as its most successful bending machine worldwide, and it is the workhorse tier for high-mix production. It runs the Touchpoint TruBend control, a tablet-style interface with realistic 3D visualization and collision checking that shortens the learning curve for operators. A six-axis backgauge, lower tool displacement and an On-Demand Servo Drive that runs quietly and trims energy use round out the platform.

Model designations step up in press force and bending length as you move through the range, from the older, now mostly used-market TruBend 5050 and the current 5085 in the lighter tonnages through the 5130, 5170, 5230 and up to the 5320 at the top. The numbers track tonne-force, so a 5085 is about 94 US tons on a bed a little over eight feet, while a 5130 runs around 143 US tons across a bed near ten and a half feet. That span covers most general fabrication, from a small bracket shop to a heavy structural fabricator, which is a large part of why the 5000 is the most common TruBend on shop floors.

For a buyer shopping used, the 5000 is where the deepest inventory sits. Because these machines stay in service for many years, there is an active secondary market across several control generations. When you evaluate a used 5000 series brake, confirm the control generation and the backgauge axis count rather than assuming, because both drive how the machine runs day to day and both feed directly into its resale value.

TruBend Series 7000: the compact high-speed tier

The TruBend Series 7000 is the compact high-speed tier, engineered for small and medium parts with an emphasis on ergonomics and cycle time. It uses a direct drive for fast, accurate strokes and it was the first bending machine to carry an ergonomics certificate, which matters in a station where an operator is loading and bending small parts all shift. The TruBend 7036 delivers 360 kilonewtons of press force, about 36 tonnes or roughly 40 US tons, over a 1020 millimeter bending length, while the TruBend 7050 steps up to 500 kilonewtons, about 51 tonnes or roughly 56 US tons, over 1530 millimeters.

The 7000 series also leans on Trumpf's ACB angle measurement technology, including wireless sensor options and software that applies springback data intelligently across a run to cut setup and cycle time. Shops running high volumes of smaller bent parts often justify a 7000 on labor and throughput gains alone, because the speed and the ergonomic loading position let one operator keep the machine fed without the fatigue that slows a standard brake late in a shift.

Controls and bending technology

Across the current TruBend range the control is the Touchpoint TruBend interface, a touch-driven HMI with 3D visualization and collision checking that standardizes the operator experience from the value tier up through the workhorse and high-speed machines. That control commonality matters for a buyer, because it protects operator training and lowers the retraining cost when a shop steps up to a larger machine later. It also keeps a used machine desirable to the next buyer, which supports resale value and, in turn, the collateral behind a financing deal.

The other thread through the line is angle measurement. Trumpf's ACB systems, in laser and wireless forms, measure the bend as it happens and correct for springback so the first part lands in tolerance. For a high-mix shop that changes jobs many times a day, that first-part accuracy is where the money is, because scrapped test bends and re-setups are pure lost time. When you evaluate an older used TruBend, the control generation and whether angle measurement is fitted belong at the top of the inspection checklist, since they separate a machine that runs from one that waits on an operator.

What used TruBend press brakes cost right now

Trumpf holds a premium reputation and the used market reflects it, but the numbers move with series, year, tonnage, control generation and backgauge configuration. A few real data points seen on 2026-09-13 anchor the range.

At the value end, a 2008 TruBend 3120 rated at 135 US tons on a ten foot bed with a six-axis backgauge was listed at $48,750 by a US dealer, and a 2012 3120 in a similar class surfaced near $47,500. In the compact high-speed tier, a 2016 TruBend 7036 at 40 US tons with a 40 inch bed and tooling included was listed at $80,000 before it went off the market, which shows how firmly the smaller, newer machines hold value. On the workhorse 5000 series, a 2015 TruBend 5085 at 94 US tons carried an aggregate estimated value near $34,000 on one marketplace, while a 2018 TruBend 5130 at 143 US tons with the Touchpoint TruBend control and a six-axis backgauge was offered on a request-quote basis rather than a published price. Looking at European inventory for the larger 5170, priced listings ran from about 39,900 euros for a 2007 machine with a bending robot up to roughly 79,900 euros for a 2014 four-meter unit.

Two cautions apply to every one of these figures. Many dealer listings are price-on-request, so published numbers are a partial view of the market rather than a full one. Condition drives the rest, because hours, ram and drive wear, backgauge condition and any remaining service coverage can swing value by a wide margin on otherwise identical machines. Treat the numbers above as real data points seen on the date given, not as a quote on any specific unit.

Why value retention matters for your financing

Value retention is not just trivia for a buyer. It is the collateral story that underwrites the deal. A funding partner is more comfortable structuring a used-equipment transaction when the asset holds a strong, liquid resale value, and TruBend machines do exactly that across most of the range. That collateral quality is one reason a well-kept used TruBend can often be financed on terms close to what a comparable new machine would carry.

It also protects you at the back end of the term. A shop that finances a 3000 series brake and later needs to move up to a 5000 series machine, or add automation, has an asset with real remarketing value, which keeps options open rather than leaving equity trapped in a machine that will not sell. We size the term to where a specific machine's value is realistically heading, so you are never paying on a brake longer than it holds meaningful resale.

How iLease Capital structures TruBend financing

Every TruBend deal is a little different, and the structure should follow the machine and the shop rather than a template. A few of the levers we work with:

- Equipment finance agreements put the machine on your balance sheet with straightforward monthly payments and full ownership at the end. This fits a workhorse 5000 series brake you intend to run for its full service life. - Fair market value leases can lower monthly cost and preserve cash, with options to buy the machine, return it or upgrade at term end. This suits a shop that expects to refresh onto a newer platform on a defined cycle. - Dollar buyout leases give lease treatment during the term and clear ownership at the end for a nominal figure, which works for an owner who wants to keep the machine long term. - Seasonal, step and deferred structures line up with fabrication cash flow, so a shop with lumpy project revenue is not carrying a flat payment through slow months, and a new machine can ramp before the first full payment lands.

We arrange financing up to $5 million plus and place no artificial minimum on deal size, so a single used TruBend 3120 and a multi-machine bending cell with tooling and an automatic tool changer both fit inside what we do. We routinely wrap in tooling, freight, rigging and installation so the amount financed reflects the real cost of getting the brake producing rather than just the base machine price. Because we work through a network of lenders and funding partners rather than a single balance sheet, we can shop the structure and the rate rather than fit you to one lender's box, and approvals lean on time in business, cash flow and the equipment itself rather than a single credit score.

On credit, an initial review is a soft inquiry that does not affect your credit, and a hard pull may come only at final approval once you decide to move forward. That lets you see indicative terms and compare structures before committing to anything, so early conversations stay low risk while you weigh a new-machine quote against a used-market alternative.

What to have ready

Approvals move faster when the basics are in hand. For most TruBend deals that means a quote or invoice for the specific machine and configuration, plus recent business financials or bank statements depending on deal size and a short description of how the brake fits your production. Used-machine deals also benefit from the year, serial, hours, control generation and any service or refurbishment records, since those feed directly into the residual value the lender is underwriting against. The cleaner the collateral picture, the better the terms tend to be, and good used TruBend units do not sit long, so a ready file helps you act before the machine sells. Call (866) 545-3273 and we can start pricing the deal while you finalize the quote.

Talk to iLease Capital

If you are pricing a Trumpf TruBend 3000, 5000 or 7000 series press brake, let us structure the financing before the quote goes stale. Call (866) 545-3273, start your application at ileasecapital.com/apply, it takes about three minutes and there's no hard credit pull, or reach us through /contact. We will match the structure to your machine, your production schedule and your cash flow, and we will show you indicative terms with only a soft inquiry to start.

Frequently asked questions