Trumpf Equipment Financing

Trumpf sits at the premium end of the sheet metal machine market, and the price tags reflect it. A fully configured 2D fiber laser or a high-tonnage press brake can run well into the mid six figures, and a punch-laser combination system can climb higher still. For a fabrication shop that wants Trumpf build quality, the question is rarely whether the equipment is good. The question is how to acquire it without draining working capital or waiting until cash reserves catch up with the opportunity in front of you. That is where structured equipment finance earns its place.

iLease Capital arranges financing across the full Trumpf range, from a compact TruBend press brake to a flagship TruLaser fiber system or a TruMatic combination machine. We finance new and used Trumpf machines, from a single machine up to $5 million plus. We work with a network of lenders and funding partners that understand fabrication equipment, hold their residual value assumptions to real market data and can structure terms around your production calendar rather than a generic amortization table. There is no artificial floor on what we will look at, and you can reach us at (866) 545-3273 to talk through a specific machine before you apply.

Why Trumpf holds its value

Financing decisions on capital equipment hinge on collateral. A lender is more comfortable, and usually more flexible, when the underlying machine retains a strong resale value across the term of the loan or lease. Trumpf is one of the clearer examples of that dynamic in the fabrication world.

Used Trumpf machines trade actively on the secondary market, and later-model fiber lasers in particular retain a large share of their original value. As a reference point, a used TruLaser 3030 fiber built between 2018 and 2022 was listed in the range of roughly $200,000 to $450,000 depending on laser power, operating hours and included automation, according to pricing published on machinetoolindex.com and seen in September 2026. A new 6 kilowatt 3030 fiber was quoted in the $400,000 to $550,000 band over the same period. When a five to eight year old machine still commands a meaningful fraction of a new unit's price, the residual math works in your favor, and lenders can price the deal accordingly.

Trumpf's own resale program reinforces this. The company operates a factory refurbishment channel for pre-owned machines, and a TRUMPF Resale Center survey it cites indicates refurbished units continue to run reliably for at least ten years with their second owners. Genuine parts, documented service history and a manufacturer-backed refurbishment path all support the collateral case that sits behind a financing approval. It also gives you a real exit if your production needs change before the equipment reaches end of life.

Value retention is not uniform across the lineup. Newer high-power fiber lasers with automation hold value best. Older hydraulic press brakes drop further over time, which is normal for the category. We factor that spread into the structure we recommend, matching term length to how the specific machine is likely to age.

TruBend press brakes

The TruBend line covers the bending side of a fabrication operation, and Trumpf segments it clearly by series.

The TruBend Series 3000 is the value-oriented tier, built to pair Trumpf quality with a favorable price-performance ratio. Press force runs from about 93 tons up to roughly 253.5 tons, with bending lengths spanning around 6.5 feet to 13 feet. You can specify a 2, 4 or 5-axis backgauge, and the optional ACB Laser angle measuring system helps get the first part in tolerance rather than after several test bends. For a shop standing up its first Trumpf brake or adding capacity on a budget, the 3000 is usually the entry point.

The TruBend Series 5000 is described by Trumpf as its most successful bending machine worldwide, and it is the workhorse tier for high-mix production. It uses the Touchpoint TruBend control, a tablet-style interface that shortens the learning curve for operators, along with a 6-axis backgauge, lower tool displacement and an On-Demand Servo Drive that runs quietly and cuts energy use. Model designations such as the 5085, 5130 and 5170 step up in press force and bending length as you move through the range. A used 2007 TruBend 5085 rated at 94 US tons with an 8.5 foot bed and a 6-axis backgauge was recently listed by a US dealer, which shows how long these machines stay in service on the secondary market.

The TruBend Series 7000 is the compact high-speed tier, engineered for small and medium parts with an emphasis on ergonomics and cycle time. It uses a direct drive and automatic angle measurement, and it was the first bending machine to carry an ergonomics certificate. The TruBend 7036 delivers 36 tons of press force over a 1020 millimeter bending length, while the TruBend 7050 steps up to 50 tons over 1530 millimeters. Shops running high volumes of smaller bent parts often justify a 7000 on labor and throughput gains alone.

Because press brakes range widely in price, from a modest used 3000 to a large new 5000 or a fast 7000, financing structure matters. A shorter lease can make sense on a high-value machine you may want to refresh, while a straightforward equipment loan can fit a workhorse you plan to keep for a decade.

TruLaser fiber lasers

Trumpf's 2D fiber laser cutting machines carry the TruLaser name, and the numbering separates the tiers.

The TruLaser 1030 fiber, along with its longer-bed 1040 and 1060 siblings, is the entry-to-mid tier. The 1030 has a 3000 by 1500 millimeter working area and is offered with laser power up to around 4 kilowatts. A 2019 TruLaser 1030 fiber at 4 kilowatts on a 5 by 10 foot table, carrying just over 12,000 operating hours, was listed at $379,900 by a US dealer in September 2026, which gives a concrete anchor for what a well-equipped used unit costs.

The TruLaser 3030 fiber is the volume tier and probably the most common Trumpf laser on shop floors. It shares the 3000 by 1500 millimeter format and is offered from 4 kilowatts up to 24 kilowatts, with Trumpf's BrightLine fiber option combining special optics and flow-optimized nozzles for cleaner cuts in thicker material. Longer-bed variants carry the 3040, 3060 and 3080 designations. New pricing scales sharply with power, from roughly $400,000 to $550,000 at 6 kilowatts up past $1,000,000 for a 24 kilowatt machine loaded with automation, per pricing seen on machinetoolindex.com in September 2026.

The TruLaser 5030 fiber sits at the premium throughput tier, with up to 24 kilowatts of laser power and faster dynamics. Its positioning speed of around 280 meters per minute outpaces the roughly 170 meters per minute of the 3030, which translates into more parts per shift on high-utilization lines. Trumpf also builds the TruLaser Cell family for 3D and tube-oriented work, which serves a different set of applications.

Laser power is the single biggest driver of both purchase price and financing size, so we size the structure to the kilowatt rating, the automation package and how many shifts you plan to run. A machine that runs two or three shifts a day generates the cash flow to support a more aggressive term than one that runs part time.

TruMatic punch-laser combination machines

The TruMatic line combines punching and laser cutting in a single machine, which suits shops that need forming, tapping and cutting in one setup rather than moving parts between a punch press and a laser.

The TruMatic 6000 fiber is the representative model. It pairs a punching head delivering roughly 20 to 22 tons of force at up to about 1000 strokes per minute with a solid-state laser in the 2.7 to 3.2 kilowatt range. It processes mild steel and stainless up to about 8 millimeters and aluminum up to 4 millimeters, and it runs on a Siemens SINUMERIK 840D control. Combination machines carry a higher entry price than a standalone laser or punch press, but they collapse two operations into one footprint and one setup, which is often where the return comes from.

On the used market, TruMatic combination systems have traded in a wide band. European listings have shown prices roughly from 60,000 euros to 300,000 euros depending on age, configuration and hours, per Exapro and resale marketplace data seen in September 2026. US dollar pricing varies with import, freight and installation, so we treat those figures as directional rather than a firm quote for a domestic machine.

How iLease Capital structures Trumpf financing

Every Trumpf deal is a little different, and the structure should follow the machine and the shop rather than a template. A few of the levers we work with:

Equipment loans put the machine on your balance sheet with straightforward monthly payments and full ownership at the end. This fits a workhorse press brake or a laser you intend to keep for its full service life.

Capital and operating leases can lower monthly cost and preserve cash, with options to buy the machine at the end, return it or upgrade. This suits a premium laser you might want to refresh as fiber technology advances.

Seasonal and step payment structures line up with fabrication cash flow, so a shop with lumpy project revenue is not carrying a flat payment through slow months.

Deferred and application-only options can get a machine installed and earning before the first full payment lands, subject to credit and deal size.

We arrange financing up to $5 million plus and place no artificial minimum on deal size, so a single used TruBend and a multi-machine automated laser cell both fit inside what we do. Because we work through a network of lenders and funding partners rather than a single balance sheet, we can shop the structure and the rate rather than fit you to one lender's box.

Multi-machine deals are common with Trumpf. A shop adding a TruLaser cutting cell alongside an existing TruBend line, or bundling a new press brake with software and tooling, can often finance the full package under one structure rather than chasing separate approvals for each line item. Bundling that way tends to cut down on paperwork and can smooth the combined payment schedule even when the individual machines carry different useful lives.

On credit, an initial review is a soft inquiry that does not affect your credit, and a hard pull may come only at final approval once you decide to move forward. That lets you see indicative terms before committing to anything.

What to have ready

Approvals move faster when the basics are in hand. For most Trumpf deals that means a quote or invoice for the specific machine and configuration, recent business financials or bank statements depending on deal size and a short description of how the equipment fits your production. Used-machine deals also benefit from the year, serial, hours and any service or refurbishment records, since those feed directly into the residual value the lender is underwriting against. The cleaner the collateral picture, the better the terms tend to be.

Talk to iLease Capital

If you are pricing a Trumpf TruBend, TruLaser or TruMatic machine, let us structure the financing before the quote goes stale. Call (866) 545-3273, start your application at ileasecapital.com/apply, it takes about three minutes and there's no hard credit pull, or reach us through /contact. We will match the structure to your machine, your production schedule and your cash flow, and we will show you indicative terms with only a soft inquiry to start.

Frequently asked questions