CBCT Scanner Financing:
Dental Cone Beam CT by Field of View.

iLease Capital finances new, used and refurbished dental CBCT cone-beam scanners, from small field-of-view endodontic units to large field-of-view maxillofacial and orthodontic systems. A cone-beam scanner is the single largest imaging purchase most dental practices make, and it is the piece that usually anchors the collateral when a practice finances its imaging. Price tracks field of view first, with new systems ranging from roughly $50,000 for a compact unit to well past $150,000 for a large-volume machine, so the way a scanner is configured matters as much to the financing as the sticker on the quote. If you are pricing a CBCT system, new or used, you can talk it through with a specialist at (866) 545-3273.

iLease Capital finances cone-beam scanners for general dentists, endodontists, periodontists, oral surgeons, orthodontists and multi-location dental groups, and financing may be available for transactions up to $5 million plus with no minimum floor. As a broker with more than 50 lender relationships rather than a single direct lender, iLease can match a specific scanner to a funding partner that understands cone-beam collateral, which matters because a small field-of-view endodontic unit and a large maxillofacial system are valued in very different ways. This guide breaks CBCT down by field of view, with current market price ranges for new and refurbished systems, the brands and platforms lenders see most and the details that set what a used scanner is worth. This page sits under our broader dental imaging financing guide, and for the full picture across the practice see our dental equipment financing hub.

Why CBCT Is the Big-Ticket Dental Imaging Investment

Cone-beam computed tomography is the high end of dental imaging and the system most practices chase when they move into implant, endodontic, airway and orthodontic planning. Where an intraoral sensor or a phosphor plate reader is a low-value consumable item, a CBCT scanner is a substantial serviceable machine with a serial number, a service record and an established secondary market of buyers looking for used and refurbished units. That is why it anchors the collateral in most dental imaging deals. A financing structure rests on an asset that can be identified, valued and, if it ever comes to it, remarketed, and a cone-beam scanner fits that description far better than the smaller items around it. For a practice, the practical takeaway is that presenting the scanner with its full configuration, field of view, software version and service history is the single most useful thing you can do to help the financing come together on good terms.

New CBCT Pricing by Field of View

Field of view is the first thing that moves the price on a cone-beam scanner, because it defines how much anatomy the machine captures in a single volume. New dental CBCT systems generally run from about $50,000 to $150,000 and up, and the band a given unit falls into tracks its field of view closely. Small field-of-view scanners built for endodontics and single-implant work commonly run $45,000 to $75,000 new. Medium field-of-view systems that cover a wider section of the arch typically land in the $65,000 to $100,000 range. Large field-of-view maxillofacial and orthodontic systems that capture the full jaw or skull run from about $90,000 past $150,000, with premium configurations and advanced software carrying the top of that band. Voxel resolution, low-dose protocols, artificial-intelligence analysis tools and surgical planning modules all layer onto the base price, which is why two scanners with the same nominal field of view can still quote very differently.

Small Field-of-View Scanners

Small field-of-view scanners, in the range of roughly 5x5 centimeters, are built for the practice that needs precise, low-dose 3D of a limited region rather than a full-arch or full-skull volume. Endodontists reaching for a single tooth and general practices planning a single implant are the typical buyers, and the appeal is a lower dose to the patient along with a lower entry price. New small field-of-view units commonly run $45,000 to $75,000, and the refurbished market brings that down further. Because these are the lowest-value cone-beam scanners, the transaction leans a little more on the practice than on a large maxillofacial machine would, though the scanner still carries real collateral weight. Many small field-of-view units are combination systems that also capture a 2D panoramic image, which broadens their appeal and their resale market.

Medium Field-of-View Scanners

Medium field-of-view systems, often around 8x8 centimeters, are the workhorse of general and specialty dentistry that wants to cover most of the arch without stepping up to full-skull imaging. They handle multi-tooth implant planning, broader endodontic work and a good deal of oral surgery, which makes them a common upgrade for a practice adding 3D for the first time. New medium field-of-view scanners typically run $65,000 to $100,000, and many are selectable-field units that also offer smaller volumes for lower-dose focused scans. This flexibility is worth documenting on a quote, because a scanner that spans several fields of view has broader clinical use and a broader resale market than a fixed single-volume unit. The condition of the tube and sensor and the software version still define value on any used medium field-of-view purchase.

Large Field-of-View Scanners

Large field-of-view scanners capture the full jaw or the full skull in a single volume, which is what oral surgeons and orthodontists rely on for complex surgical planning, airway analysis and full cephalometric workups. They are the largest and most capable cone-beam systems, and they price accordingly, commonly running from about $90,000 past $150,000 new for premium configurations. These systems carry the broadest resale market of any dental imaging asset, which is part of why they anchor the collateral so firmly. A large field-of-view scanner is a serious fixed installation, so the total project cost includes mounting, electrical, shielding review and network integration on top of the machine itself. On a used large field-of-view system, the scan count and remaining tube life along with the software version and any license-gated features are the details that set what the scanner is worth to the next owner.

The Used and Refurbished CBCT Market

Cone beam has one of the healthiest used and refurbished markets in dentistry, which works in a borrower's favor. Certified pre-owned scanners commonly sell 30 to 50 percent below new pricing while carrying warranties, professional installation and documented refurbishment, and that combination of lower cost and retained value tends to support better terms than an as-is gray-market unit. Real certified pre-owned listings show the shape of the market clearly. Refurbished small and medium systems such as a Carestream CS 8100 3D, a Dentsply Sirona Orthophos SL 3D, a Vatech PaX-i3D Smart Plus or a Planmeca ProMax 3D Classic commonly land in the high $30,000s to low $40,000s. Larger selectable-field systems such as a Carestream CS 8200 3D, a Planmeca ProMax 3D Mid or a DEXIS and KaVo OP 3D platform commonly run in the low to mid $40,000s. Premium large-volume systems such as a Dentsply Sirona AXEOS 3D, a Carestream CS 9600 or an i-CAT FLX run into the mid $50,000s to mid $60,000s refurbished. On any used cone-beam purchase, and especially a large field-of-view one, verify the scan or exposure count and remaining tube life, the software version and whether the field-of-view or feature unlock transfers with the machine.

Brands and Platforms Lenders See Most

A handful of manufacturers dominate the dental cone-beam market, and knowing where a scanner sits helps set expectations on both price and resale. Dentsply Sirona builds the Orthophos line, including the Orthophos SL 3D and the newer AXEOS platform, which are common in general and specialty practices. Carestream Dental spans the CS 8100 3D at the compact end through the CS 8200 3D and the premium CS 9600 with its wide selectable fields of view. Planmeca offers the ProMax 3D family across Classic, Mid and Plus configurations that scale from focused volumes to large fields. Vatech is known for value-oriented systems such as the PaX-i3D and the PaX-i Green CT line. The OP 3D platform, sold under the KaVo and DEXIS brands, is a widely serviced selectable-field system, and Morita builds the Veraview line favored for image quality. Because features and fields of view can be license-gated across all of these platforms, the specific configuration matters more than the badge when a lender values the asset.

What Lenders Evaluate on a CBCT Scanner

Across every cone-beam deal, a few factors carry outsized weight. Field of view comes first, because it drives the price and defines whether the machine is a lower-value endodontic unit or a large maxillofacial system with a broad resale market. Voxel resolution and the presence of low-dose and advanced reconstruction protocols shape both the clinical value and the price. Whether the scanner offers 2D panoramic capability alongside its 3D volumes matters, since a combination unit serves a wider range of practices and resells more easily than a 3D-only machine. The software platform and its license transferability can make or break a used purchase, because a stranded license undercuts an otherwise sound scanner. Sensor and tube age, and on a used unit the scan or exposure count and remaining tube life, factor into value the way mileage does on a vehicle. Service and maintenance contract status signals a supported asset, and installation, shielding and network work affect the total project cost. The more clearly the scanner and its support status are documented, the smoother the financing.

Panoramic Capability Versus 3D-Only

Many dental cone-beam scanners are combination systems that capture a 2D panoramic image and a 3D volume on the same platform, and some also carry a cephalometric arm. This matters to a practice deciding what to buy and to a lender valuing the asset. A combination unit lets a general or specialty practice replace an aging panoramic system and add 3D in a single purchase, which suits a first-time 3D buyer and broadens the machine's resale market. A 3D-only or small field-of-view scanner can be the right call for an endodontist or a practice that already runs a separate panoramic unit and only needs focused 3D. On a used purchase it is worth confirming exactly what is present and licensed, because panoramic and cephalometric capability are sometimes configurable options rather than standard features, and an unlock that does not transfer weakens both function and value.

Software, Licensing and Sensor Age

Software is where a great deal of hidden value and hidden risk lives in a cone-beam scanner. CBCT systems depend on imaging and reconstruction software, and capabilities such as a larger field of view, advanced reconstruction, airway analysis or implant and surgical planning modules can be license-gated rather than built into the hardware. An outdated or non-transferable license can strand an otherwise sound scanner, because the next owner may be unable to run the system or unlock the capability they are counting on. Sensor and tube age sit alongside this, since a flat-panel detector and an X-ray tube both have finite service lives and their condition drives image quality and remaining value. The practical step on any used purchase is to confirm the software is current and transferable, the fields of view and modules the buyer needs are included and the tube and sensor have life left. Doing that before the deal is written protects both the function and the resale value the financing depends on.

Wrapping Installation, Shielding and Setup Into the Financing

A cone-beam scanner is a fixed installation, so it pays to treat the purchase as a complete project rather than a bare equipment buy. Mounting, electrical work, radiation shielding review, calibration and the network and imaging-software integration needed to put the scanner into service are all part of getting it imaging, and many of these costs can be included in the financing where they are part of the acquisition. Installation and calibration commonly run a few thousand dollars, and shielding review and any room work can add to that depending on the space. Bundling those costs alongside the scanner keeps the practice from funding the setup out of pocket. Putting the complete turnkey cost on the quote, the scanner plus installation, calibration, shielding and integration, lets the financing reflect the real project and produces a single, predictable monthly payment rather than a series of separate outlays.

Getting Started

Start your application at ileasecapital.com/apply, it takes about three minutes and there is no hard credit pull. The most useful details to have ready are the make, model and field of view, whether the scanner is new, used or refurbished, the age and software version, whether it offers 2D panoramic or cephalometric capability, the scan or exposure count and tube life on a used unit, the service or warranty status, the vendor or dealer, the purchase price and any installation, shielding and network setup. Smaller cone-beam purchases may qualify for a streamlined application on qualifying transactions, while premium large field-of-view systems are typically structured with additional documentation and can be presented together with their setup costs as one project.

Financing a CBCT Scanner Through iLease Capital

iLease Capital works with general and specialty practices and dental groups acquiring new, used and refurbished cone-beam scanners across every field of view, from compact endodontic units to large maxillofacial systems. As a broker with more than 50 lender relationships, iLease can match a specific scanner to a funding partner that understands cone-beam collateral, and financing may be available for transactions up to $5 million plus. Whether you are financing a small field-of-view endodontic unit, a combination panoramic and cone-beam system or a refurbished large-volume scanner with its full installation, send the configuration and setup costs, or call us at (866) 545-3273. For the wider view across intraoral, panoramic and ceph systems, see our dental imaging financing guide, and for the full range of dental categories see our dental equipment financing hub.

Frequently asked questions