Agilent ICP-OES Financing:
5800, 5900, and Used Systems.

Agilent ICP-OES systems are used for multi-element analysis across environmental testing, food and agriculture, mining and materials, pharmaceutical testing, battery materials and other laboratories handling elemental analysis. For a laboratory preparing to finance one of these systems, the model and configuration matter. A current Agilent 5800 ICP-OES, a high-throughput 5900 SVDV ICP-OES and a used 5110 or 5100-series instrument should not be treated as identical equipment simply because they carry the same manufacturer name.

The complete acquisition matters too. An ICP-OES purchase can include an autosampler, Advanced Valve System, automated dilution equipment, chiller, software, sample introduction accessories and sample-preparation equipment. A laboratory purchasing an automated 5900 workflow presents a different equipment package from one acquiring a used standalone 5110 from a secondary-market dealer. Understanding the Agilent lineup first makes it easier to structure the financing request correctly.

Understanding the Agilent ICP-OES Lineup

Agilent's current ICP-OES portfolio centers on the 5800 ICP-OES and 5900 SVDV ICP-OES. Both use a vertical torch design, simultaneous detection and Agilent's ICP Expert software, but they target different laboratory requirements.

The Agilent 5800 ICP-OES is designed for busy laboratories performing routine and complex elemental analysis. Agilent offers the 5800 with Vertical Dual View capability, allowing laboratories to select viewing modes based on the analytical requirement. The 5800 incorporates Agilent's IntelliQuant software tools to help identify spectral interferences and assist with wavelength selection, and it uses instrument diagnostics including Neb Alert to monitor nebulizer condition and alert the operator to issues that could otherwise cause troubleshooting or sample remeasurement. For an equipment buyer, the 5800 should be viewed as more than a generic optical emission spectrometer. Configuration matters, since the sample introduction setup, autosampler, valve system, dilution equipment and software included with the quote can materially change what the laboratory is actually purchasing. A laboratory replacing an older Agilent ICP-OES may choose the 5800 when it needs a current platform for routine elemental analysis without requiring the specific high-throughput configuration of the 5900.

The Agilent 5900 SVDV ICP-OES is Agilent's current high-throughput ICP-OES platform. Its Synchronous Vertical Dual View design captures axial and radial views of the plasma in the same measurement rather than requiring them to be measured separately. That distinction is particularly relevant for laboratories processing high sample volumes. The purchase may be driven not simply by replacing an older instrument but by reducing analysis time, increasing capacity or automating a larger portion of the elemental-analysis workflow. The 5900 can also be configured as part of an Agilent automation system incorporating sample handling and dilution equipment, so a financing request should identify whether the laboratory is purchasing a standalone 5900 or a broader automated ICP-OES workflow.

Current Systems vs. the Used Agilent ICP-OES Market

The secondary market includes earlier Agilent ICP-OES generations alongside the current 5800 and 5900. The Agilent 5110 ICP-OES has been discontinued, and Agilent states that it was superseded by the 5800 and 5900. The 5110 used Agilent's dichroic spectral combiner technology for synchronous radial and axial measurements and was offered with an optional Advanced Valve System. Agilent's current ICP Expert software resources also continue to reference both 5110 and 5100 ICP-OES systems, making those generations relevant when identifying equipment that buyers may encounter used.

A legacy model should not automatically be treated as poor collateral simply because the OEM has introduced a newer generation. The lender still needs to understand the exact instrument, age, condition, service history, included accessories, seller and purchase price. A dealer-reconditioned 5110 that is operational and documented presents a substantially different transaction from an older system being sold as-is with uncertain condition. For used equipment, the quote should also distinguish between the spectrometer itself and the complete system, since autosamplers, sample introduction hardware, software, workstation and other components may affect both acquisition price and the usefulness of the equipment to the buyer. See our broader guide on laboratory equipment financing for how we approach analytical instruments generally.

Financing a New Agilent ICP-OES

A new Agilent ICP-OES acquisition typically begins with a detailed equipment quote showing whether the laboratory is purchasing a 5800, 5900 or a configured automation system. Financing may allow a laboratory to spread the equipment acquisition over a defined term rather than using the entire purchase price from working capital upfront. This can be relevant when the ICP-OES is only one part of a laboratory expansion that also requires sample-preparation equipment, automation, staffing and facility infrastructure.

The reason for the acquisition should be clear. An environmental laboratory may be increasing metals-testing capacity, a battery laboratory may need additional elemental-analysis capability for raw materials or product components, a mining laboratory may be adding capacity for high-volume sample analysis, and a pharmaceutical laboratory may be acquiring equipment for elemental impurities workflows. The financing request is stronger when the equipment purchase has a clear connection to the laboratory's actual operation.

Financing a Used or Refurbished Agilent ICP-OES

Used and refurbished Agilent ICP-OES systems can be financeable, but the documentation becomes increasingly important as equipment ages. For a used Agilent ICP-OES purchase, prepare the exact model number, serial number when available, year of manufacture when available, current operating condition, viewing configuration, torch and sample introduction configuration, nebulizer and spray chamber information where relevant, autosampler included with the system, Advanced Valve System if included, automated dilution equipment if included, chiller if included, computer and ICP Expert software, software license status, service and preventive-maintenance history when available, refurbishment or testing performed by the seller, warranty or post-sale support, installation and qualification included in the sale, and the complete purchase price.

The equipment description should be specific. "Used Agilent ICP-OES" tells the lender very little. A quote identifying the model, condition, autosampler, sample introduction hardware, software, workstation, chiller and dealer support provides a much clearer picture of the collateral.

Upgrading From an Older Agilent ICP-OES

Agilent provides a clear current upgrade path from its discontinued 5110 generation to the 5800 and 5900. The reason for upgrading can differ significantly by laboratory. A lab may replace an older system because downtime is increasing, another may want the diagnostics and software capabilities of the 5800, a high-volume commercial lab may move to the 5900 because throughput has become the limiting factor, and another buyer may add automated sample handling and dilution as part of the equipment replacement. The financing request should explain what the new system changes operationally rather than simply saying that the laboratory is purchasing a newer model. Relevant reasons can include increased sample throughput, reduced manual sample handling, replacement of aging equipment, additional testing capacity, expansion into new applications or standardization across multiple laboratory locations.

Buying Direct From Agilent vs. a Dealer vs. Private Party

A new Agilent ICP-OES purchased through the manufacturer or an authorized sales channel will generally have a detailed quote identifying the instrument and included configuration. Used purchases require more attention to documentation. A reputable analytical-equipment dealer may inspect, service, refurbish or install an ICP-OES before resale, and the quote should clearly state what has been tested, what is included and what support is provided after the sale. A private-party purchase may also be financeable but typically requires additional verification. The lender may need to verify equipment ownership, serial number, location, condition and purchase price, and the seller's reason for disposing of the equipment can also provide useful context. Auction purchases should be addressed before bidding rather than assuming financing can be arranged after the equipment has already been purchased.

Don't Forget the Supporting Equipment

An ICP-OES does not operate as an isolated instrument. The complete analytical workflow may include substantial supporting equipment. Depending on the configuration, an Agilent ICP-OES acquisition may include an SPS autosampler, Advanced Valve System, Advanced Dilution System, Smart chiller, nebulizers, spray chambers, specialized torches, a vapor generation accessory, a multimode sample introduction system, an argon humidifier, a temperature-controlled spray chamber, workstation, ICP Expert software, microwave digestion system, acid digestion equipment, ultrapure water system, fume hood, UPS or power-conditioning equipment, and installation and qualification. Agilent offers integrated automation systems for both the 5800 and 5900 that combine the ICP-OES with an Advanced Valve System, Advanced Dilution System, autosampler and instrument software. That matters financially, because a laboratory may not actually be financing a single ICP-OES. It may be financing an automated elemental-analysis workflow. If the project also includes a microwave digestion system, chiller or other eligible supporting equipment, provide the complete set of vendor quotes so the financing company can evaluate the entire acquisition.

Why the Exact Agilent ICP-OES Model Matters to a Lender

"Agilent ICP-OES" is not a sufficiently detailed collateral description. A current 5800, current 5900 and discontinued 5110 represent different generations and configurations, and an older 5100-series system adds another variable. The exact model helps the lender understand what is being financed, whether it is current or legacy equipment, its approximate generation, its configuration and whether comparable secondary-market equipment can be identified. For used equipment, the model also helps determine whether the asking price appears reasonable for the particular instrument and package. Supporting components matter too, since an automated 5900 system with autosampling, valve switching and dilution equipment is not the same equipment package as a standalone spectrometer.

What You'll Need to Finance an Agilent ICP-OES

Start with the complete equipment quote. Useful information includes the exact Agilent ICP-OES model, the complete configuration, whether it is new, used or refurbished, the vendor or seller, the purchase price, the serial number and year when available, operating condition for used equipment, service history when available, included autosampler, chiller, software and automation, installation or qualification included in the purchase, business information and ownership, and a brief explanation of how the laboratory will use the equipment. Qualifying smaller transactions may be eligible for application-only financing, while larger or more complex transactions may require additional business and financial documentation.

Financing an Agilent ICP-OES Through iLease Capital

iLease Capital works with laboratories acquiring new, used and refurbished analytical equipment including ICP-OES systems and supporting laboratory equipment. Financing may be available for transactions up to $5 million plus, and qualifying smaller transactions may be eligible for application-only financing. If you are evaluating an Agilent 5800, 5900, used 5110 or another legacy Agilent ICP-OES system, send the complete equipment quote. The exact model, condition, seller, automation and supporting equipment help us understand the acquisition and structure the financing request correctly.

Frequently asked questions